#File: dialoog.pas
S  1  Initialising help~
S  2  filename ~
S  3  This primitive is already%a parameter of this layer%%<  ok  >  [ remove inpar ]%~
S  4  Remove inpar not yet implemented%%sorry%~
S  5  These elements will be deleted%%<  ok  >  [ cancel ]%~
S  6  %All parameters are default %~
S  7   has no licence for ~
S  8   %Enter the licencenumber%~
S  9  For information contact your local GRIVAK dealer%~
S 10  Licencenumber ? ~
S 11   Save %% < with parameters > %% [ without parameters ] %% [with aql program call] %%~
#File: edit_term.pas
S 12  This length or angle does not influence%%the measurement value%%<exit>%~
S 13  No better value can be reached%% <old value>  [exit]%~
S 14  This value cannot be reached%%<exit>%~
S 15  End of list%~
#File: group.pas
S 16   Select in % rectangle %%%~
S 17  [  select   ]%%[ deselect  ]%%[ select 1  ]%%[deselect 1 ]%%%[   exit    ]%%[Name + Exit]%%[   abort   ]%%~
S 18  No name                         ~
S 19   G R O U P S ~
S 20  Name of the group  = ~
#File: icon_editor.pas
S 21  Foreground~
S 22  Background~
S 23  Clear~
S 24  Point~
S 25  Line~
S 26  Box~
S 27  circle~
S 28  free hand~
S 29  char :~
S 30  font~
S 31  set icons~
S 32  copy icon~
S 33  insert line~
S 34  delete line~
S 35  insert column~
S 36  delete column~
S 37  screencopy~
S 38  filled~
S 39  not filled~
#File: layer.pas
S 40  Enter layer name : ~
S 41  Select the layer    ~
S 42  L A Y E R S~
S 43  N A M E~
S 44  create layer~
S 45  change name~
S 46  delete layer~
S 47  {...} -> layer~
S 48  move sublayer~
S 49  color~
S 50  change states~
S 51  There are references to this layer% %[abort]  <more information> %~
S 52  These elements still depend on this layer%%[ delete ] [  cancel  ] <move to higher level>%%~
S 53  Color of the layer : ~
S 54  Layer command is active~
#File: rsc_basic.pas
S 55  return~
S 56  N A M E S~
S 57  Empty list%~
S 58  Attributes~
S 59  Select the color~
#File: runtime.pas
S 60  New file                 ~
S 61  User element with incompatible parameters%~
#File: ...sema.pas
S 62  should be value =~
#File: attrib.pas
S 63  show~
S 64  cancel~
S 65  value~
S 66  type~
S 67  name~
S 68  create~
S 69  edit~
S 70  delete~
S 71  Table file exists already~
S 72  Column too narrow~
S 73  Invalid value in table~
S 74  HOLD~
S 75  LOCKED~
#FOR POPUPMENUS
S 76   abort ~              
S 77   exit  ~                   
#File: layer.pas  
S 78  change the state of a layer~
#File: group.pas
S 79  add group~        
S 80  select in~          
S 81  rectangle~          
S 82  select~             
S 83  deselect~           
S 84  select 1~           
S 85  deselect 1~         
S 86  exit~               
S 87  name + exit~        
S 88  abort~              
S 89  delete~
#File: com_output             
S 90   saved:  ~
S 91  .top~
S 92  save with ~
S 93  AQL - ~
S 94  .aql~
#File: com_input
S 95  all elements may be deleted ?~
S 96  new ~
S 97  model - ~
S 98  procedure - ~
S 99  .pro~
S100    Yes  ~
S101    No   ~
S102  read model ~
S103   add to the current model  ~
S104    save the current model   ~
S105   abandon the current model ~
#com_drawing
S106  LANGUAGES~
#color_editor
S107  Edit color~
S108  red~
S109  blue~
S110  green~
#com_list
S111  Filename : ~
S112  layer    : ~
S113  symbol   : # = ~
S114  Output the list in the pad ~
S115  Used symbols and layers~
#File: memory.c
S116  Create a crash file ? %% <Yes > %% [ No ] %%~
S117  A crash file was made %% <empty buffer and continue> %% [ exit program] %%~
#dialog
S118  This parameter is already inpar%%<  ok  >  [ remove inpar ]%~
S119  Create inpar ?%%<  ok  >  [ cancel ]%~
S120  write~
S121  overwrite~
S122  append~
S123  cancel~
S124    ok  ~
S125  directory:~
S126  working~
S127  parent~
S128  library~
S129     #   ~
#help
S130  last help~
S131  end~
S132  Stop without saving model?%% < no > %%% [ yes  ] %%~
#File: file_io.c
S133  %% file has been written into directory  /usr/tmp %%~
#layer
S134  Select the target layer    ~
S135  Change the state of all sublayers~
#File pri_tab.c
S136  Length = ~
S137  Name = ~ 
#File aql.cxx
S138  Precompiling AQL-procedure ~
S139  Running AQL-procedure ~
S140  Redraw and Clipping.~
S141  Creating Printfile.~
#
# errormessages
#
#File: dialoog.pas
E  1  %%  Inpar has not been made  %%~
E  2  %%  There is no such primitive% in the selectable layers  %%~
E  3  %%  A primitive would depend on itself  %%~
E  4  %%  Terminal symbol was not created  %%~
#File: group.pas
E  5  %%  There is no such primitive% in the selectable layers  %%~
E  6  %%  Selecting this Primitiv is not allowed in this selection  %%~
#File: layer.pas
E  7  %%  Name already exists  %%~
E  8  %%  Not allowed%% there would be no active layer anymore  %%~
E  9  %%  Top layer cannot be deleted  %%~
#File: runtime.pas
E 10  %%  External program not found  %%~
#File: icon_editor.pas 
E 11  %%  The file couldn''t be opened  %%~
#File: rsc_basic 
E 12  %%  The file already exists %% [overwrite] <  cancel >  %%~
E 13  %%  Couldn't open file for writing  %%~
E 14  %%  Couldn't open this file for reading  %%~
E 15  %%  File is locked  %%~
E 16  %%  File is read-only  %%~
E 17  %%  No permission for this action  %%~
E 18  %%  Directory not found  %%~
E 19  %%  No name specified or  %%  file does not exist  %%~
E 20  %%  The file couldn't be opened  %%~
#File: group.pas
E 21  %%  This element is already selected  %%~
E 22  %%  No element to deselect  %%~
E 23  %%  Name too long%% maximum  ~
E 24  %%  Characters without '.top' %%~
E 25  %%  Too many recursive calls %~
E 26  %%  Input has illegal characters.% Rest of characters was skipped%~
E 27      characters. %% ~
E 28  %%  Bad editor specification in design.config %%~ 
E 29  %%  No editor specified in design.config %%~ 
E 30  %%  Can't change colors on this device%%~        
#File : basic.sema.c (tables)
E 31  %%  Bad length specification.%Default value (20) is taken.%%~  
E 32  %%  There is already a tab file with that name.%Name has not been changed.%%~
E 33  %%  Invalid column name :%empty string%%~
E 34  %%  Invalid column name :%column name exists already%%~
E 35  %%  Invalid table name :%empty string%%~
E 36  %%  Not allowed to edit the type of a column%%~     
#File : tables.c 
E 37  %%  Not allowed to create an index on this type of column.%%~
#File: com_list
E 38  %%  No Inputparameters are declared%~
#File: com_input  
E 39  %%  Error: you tried to add a user element%to a model!%~
#File : pri_tab_instance.c 
E 40  %%  The column must be an index column.%~
#File dialog.c
E 41  %%  An index can only be created%if there exists at least one table%and if a table has been selected.%~
#File : pri_user.c
E 42  %%  File not found%~
E 43  %%  Incompatible userelements%(different number of parameters%and/or different type of parameters)%~
E 44  %%  There are external references to this userelement.%Userelement can not be changed.%~
#File pri_tab.c
E 45  %%  A table name must be given before entering the editor.%~
#File layer.c
E 46  %%  A locked layer%%cannot be activated %%~
E 47  %%  A primitive in %% a locked layer cannot be edited %%~
E 48  %%  A primitive in %% a locked layer cannot be deleted %%~
E 49  %%  Action not allowed %% with a locked layer %%~
#File : dialog.c
E 50  %%  The name must be set with %% the parameter 'name'%%~
#The error messages 51 - 66 musn't be separated
E 51  %%  Unknown symbol instead of an operator%%~
E 52  %%  Operator instead of an operand%%~
E 53  %%  Operand instead of ) expected%%~
E 54  %%  '(' is expected after the name of a function%%~
E 55  %%  ')' is expected after the name of a string%%~
E 56  %%  ')' is expected after the end mark " of a string%%~
E 57  %%  ')' expected%%~
E 58  %%  Unexpected end of input%%~
E 59  %%  " expected%%~
E 60  %%  <,>,= .... are only allowed once%%~
E 61  %%  Unknown operand%%~
E 62  %%  Arguments not allowed in this case%%~
E 63  %%  This name is the name of a string%%~
E 64  %%  This name is the name of a value%%~
E 65  %%  The names of arguments may only begin with a letter or '_'%%~
E 66  %%  ',' expected%%~    
# pri_tab.c
E 67  %%  The structures of the two tables are incompatible%%~
E 68  %%  Invalid column name :%column name doesn't exist%%~ 
#group.c
E 69  %%  Please, finish first the previous rectangle selection%%~
E 70  %%  Group not created%%~
#The error messages 72 - 79 musn't be separated
E 72  %%  Division by 0%%~
E 73  %%  tan(a), a = 90 or 270 ....%%~
E 74  %%  asin(b), b must be between -1 and 1%%~
E 75  %%  acos(b), b must be between -1 and 1%%~
E 76  %%  sqrt(b), b must not be negativ%%~
E 77  %%  x ** y,  if x is negative only a integer y is allowed%%~
E 78  %%  log(b) or ln(b), b must be greater than 0%%~
E 79  %%  0**x, a negative x is not allowed%%~
E 83  %%  Command only allowed in create mode%%~
E 84  %%  The file (first layer)%%cannot be locked%%~
E 85  %%  The edited element belongs to this layer%%therefore this layer cannot be locked%% ~
E 86  %%  The modelfile is locked ( somebody else editing it ???)%% there exists a lockfile: ~
E 87  %%  Filename too long%maximum 255 characters %%~
E 88  %%  The compare primitive of the tab_instance is no longer found %% ~
#error Messages for I-DEAS
E 89  %%  Error occured during requested I-DEAS action %%~
E 90  %%  Unexpected message received from I-DEAS.%%The communication with I-DEAS is interrupted!~
E 91  %%  The connection to I-DEAS is broken (process stopped?)%%~
E 92  %%  Error occured during datatransfer from I-DEAS!%% No communication possible!%% The I-DEAS Variant Engineering process is stopped!~
E 93  %%  No communication with I-DEAS possible! %% Has I-DEAS Variant Engineering not been started from I-DEAS?%%~
E 94  %%  The start options -o, -g and -j have no meaning for for the program running on this workstation!%%~
#File : tables.c 
E100  %%  Compound column name too long - use shorter column names : %%~
#File : dialog.c - chinese inputtool
E101  %%  Problems with #/MICT_inputtool:%%Cannot be started or returns error.%%~
#File : idm.c
E110  %%  A .lck file exists.%%can't create/load model%s.%%~
E111  %%  Access %d isn't allowed.%%~
E112  %%  Access %s isn't allowed.%%~
E113  %%  Cannot delete an active model %s.%%~
E114  %%  Cannot delete an active project %s.%%~
E115  %%  Cannot validate model %s.%%~
E116  %%  Model file %s doesn't exist.%%~
E117  %%  Model name %s isn't unique.%%~
E118  %%  Model %s is not read/write.%%~
E119  %%  Model %s is not writable.%%~
E120  %%  Model %s is readonly.%%can't save model.%%~
E121  %%  %s is not a valid model name.%%~
E122  %%  %s is not a valid model name.%%more than one ':' in model name.%%~
E123  %%  %s is not a valid model name.%%more than one ';' in model name.%%~
E124  %%  %s is not a valid model name.%%Name with ';'.%%~
E125  %%  %s is not a valid model name.%%Version not numeric.%%~
E126  %%  %s is not a valid model name.%%Version must be zero.%%~
E127  %%  %s is not a valid project name.%%~
E128  %%  Database Id missing in %s.%%or DbId not numeric.%%~
E129  %%  Version Id missing in %s.%%or VeID not mumeric greater 0.%%~
E130  %%  %s is not a new model name.%%model already exists in project.%%~
E131  %%  %s is not an active model.%%can't close model.%%~
E132  %%  %s is not an active model.%%can't save model.%%~
E133  %%  %s is not an active model.%%can't saveas model.%%~
E134  %%  Project %s doesn't exist.%%~
E135  %%  Project %s is not writable.%%~
E136  %%  There are too much active models.%%can't create model.%%~
E137  %%  There are too much active models.%%can't load model.%%~
E138  %%  %s is not a new project name.%%project already exists~
E139  %%  There is no active model.%%~
E140  %%  The library name  %s is not unique.%%~
E141  %%  %s is not a new library name.%%Library already exists in project.%%~
E142  %%  The library %s can not be deleted.%%~
E143  %%  the itemtyp %d is not available in I-DEAS Datamanagement.%%~
E144  %%  the itemtyp %s is not available in I-DEAS Datamanagement.%%~
#File: sdrc_license.c
E150  %%  Error occured during inizialisation of the Lizenz-Manager!% Please contact your systemadministrator!%Check the status of the License Manager!%%~ 
E151  %%  You need a I-DEAS Variant Engineering Modeller license!% There is no license available or all licenses are in use.%%~
E152  %%  You need a I-DEAS Variant Engineering Assembly license!% There is no license available or all licenses are in use.%%~
E153  %%  You need a I-DEAS Variant Engineering DM license!% There is no license available or all licenses are in use.%%~
E154  %%  You need a I-DEAS Variant Engineering DATA-Translator license!% There is no license available or all licenses are in use.%%~
E155  %%  You need a I-DEAS Variant Engineering I-DEAS-Masterlink license!% There is no license available or all licenses are in use.%%~
E156  %%  You need a I-DEAS Variant Engineering Open-Architecture license!% There is no license available or all licenses are in use.%%~
E160  %%  Error occured during getting a I-DEAS Variant Engineering Modeller license!% Please contact your system administrator!%%~ 
E161  %%  Error occured during getting a I-DEAS Variant Engineering Assembly license!% Please contact your system administrator!%%~ 
E162  %%  Error occured during getting a I-DEAS Variant Engineering DM license!% Please contact your systema dministrator!%%~ 
E163  %%  Error occured during getting a I-DEAS Variant Engineering DATA-Translator license!% Please contact your system administrator!%%~ 
E164  %%  Error occured during getting a I-DEAS Variant Engineering I-DEAS-Masterlink license!% Please contact your system administrator!%%~ 
E165  %%  Error occured during getting a I-DEAS Variant Engineering Open-Architecture license!% Please contact your system administrator!%%~
# ... continued: layers:
E170  %%  Error! %You cannot move primitives, %which belong to a user element,%to a layer of your model!%%~
.
.
